TECHNICAL SOLUTIONS ADOPTED FOR REHABILITATION S.P. 6 MOŞNIŢA, TIMIŞ COUNTY PUBLISHED

Iacob Nemeş, Adia Grozav, Luminiţa Livia Bârliba
SP 6 Moşniţa pumping station is located within the village Moşniţa Nouă, and is situated about 1 km from Timisoara, near the county road DN 58 Timisoara - Buziaş. Moşniţa Nouă is located on county road linking Timisoara DJ592 Buziaş about 8 km from the center of Timisoara, but recently it almost adjacent to the limits, the partitions area between Moşniţa Nouă and the county in last years know a strong municipal development. Distance from other components places of the village is small, and Moşniţa Nouă is at the heart of the village territory, linked to other towns with village roads, with Moşniţa Veche 1,8 kilometers to the north, Urseni 3 km further south, Albina 3 km east and Rudicica at south-west. Urban development has led to the reduction of actual distance between places components from the nearest buildings Moşniţa Nouă and Veche with less than 250 m.  Moşniţa pumping station, proposed for rehabilitation, works from 1978 year and serves an area of 6320 hectares of agricultural premises of the establishment of draining Moşniţa, and presents advanced physical and moral wear. The station was sized for a flow Qst. = 4,3 m3/s, a pumping height H = 3,6 mca and equipped with four electropumps with horizontal shaft type BRATEŞ 600 (Qp = 1,1 m3/s, Hp = 8,6 mca) driven by induction motors MIB 2315 M90-10 with P = 90 kW, and 590 rpm and annex relevant equipment (epuisment equipment, striking equipment). Electricity supply to pumping stations to do the post processing located in close proximity to 14 m from the building. Water discharge is via two metal pipes with D = 1000 mm which crossing irrigation channel CA1. Overflow pipes Dn = 1000 mm with manual valves, operate as discharge pipes for two electro pump. The pipes have a high degree of corrosion and clogging, causing inefficient operation of the pumps. Electricity supply to pumping stations to do the post processing located in close proximity to 14 m from the building. Water discharge is via two metal pipes with D = 1000 mm which crossing irrigation channel CA1. Overflow pipes Dn = 1000 mm with manual valves, operate as discharge pipes for two electro pump. The pipes have a high degree of corrosion and clogging, causing inefficient operation of the pumps.
pumping station; aspiration; discharge; draining; physical and moral wear
Presentation: oral

Download



Back